Product Description
DRI-WASH n’ GUARD Ultra-Ion Kit (48oz/ 1.42lt)
(includes 16oz, 32oz refill bottle and microfibre towel)
DRI WASH ‘n GUARD® ULTRA-ION™ WATERLESS CARWASH™ is specifically designed for the sensitive 21st century paints used on cars manufactured since the year 2000, but it is just as effective on any paint no matter it’s age.
Ionic Technology helps repel dust from your vehicle’s surface, and the exclusive PolyGuard-3™ formula helps make existing minor feather scratching less noticeable as you apply the product by hand or if you buff the painted surfaces. It gives a deeper, richer shine than any other product in the vehicle appearance industry. Further, it is extremely aggressive in emulsifying all organic matter as well as bugs, bird droppings and tar.
ULTRA-ION™ WATERLESS CARWASH™ works exceptionally well on glass, mirrors and chrome on all vehicles, leaving a lasting protection!
Because only 60mls of DRI WASH ‘n GUARD® ULTRA-ION™ is needed to clean and detail an average car ULTRA-ION WATERLESS CARWASH™ is very economical and so versatile that virtually any hard, non-porous surface can be cleaned, polished, and protected without water; cars, boats, recreational vehicles, diesel trucks, motorcycles, skis, buses, aeroplanes, windows, benchtops, stoves, ovens and more!
Paired with the buffing action of the new DRI WASH ‘n GUARD® Buffing Towel, you have a winning combination for even the most demanding conditions.
Cleans…
- Duco
- Wheels
- Windscreen
**Brilliant on modern day paints and glass with its instant protective glaze….Ideal for Whites, Reds and Yellows vulnerable to oxidizing.**(For the more oxidized chalky paint use Oxygone).**
Instructions:
It is extremely important that DRI WASH ‘n GUARD® ULTRA-ION™ be applied with a DRI WASH ‘n GUARD® AirSpray pump sprayer only. Use on hard, non-porous surfaces only. Pre-test on an inconspicuous area before use. Can be used over surface containing moderate level of dust, dirt, road grime or salt.
Refill Procedures:
- Unscrew collar nut at neck of AIRosol pump sprayer and remove internal spray mechanism
- Invert bottle of product, shake vigorously for 15-20 seconds
- Pour contents into AIRosol pump sprayer until 75% full
- Re-Install spray mechanism and collar nut
Directions By Hand:
- Apply DRI WASH ‘n GUARD® ULTRA-ION™ in a cool, dry surface in a shaded area for best results. Avoid windy conditions if possible.
- Use a clean terry cloth towel to apply the product. Use the DWG™ Buffing Towel for buffing.
- Invert the AIRosol pump sprayer and shake vigorously for 15-20 seconds.
- Pressurize the bottle by pumping the cap “up and down” until a strong resistance is felt (approx. 10-15 times).
- Spray a light coat of DRI WASH ‘n GUARD® ULTRA-ION™ Waterless Carwash™ on a small section of vehicle (1sq.m.), spraying with a broad sweeping motion where possible.
- Using the terry cloth towel, with moderately firm pressure, rub polish thoroughly over the sprayed area until the filmy haze that developed almost disappears.
- Buff the remaining haze to a high gloss with the DWG™ buffing towel
Directions for using a Buffing Machine:
- Use a conventional or orbital-type buffer equipped with a foam-polishing pad. Do not exceed 1,500 RPM.
- Apply DRI WASH ‘n GUARD® ULTRA-ION™ as described in steps 3, 4, and 5 above.
- Immediately buff sprayed area to a high gloss.
- Continue, section by section, until all accessible areas have been buffed.
- Polish any remaining areas by hand, if necessary.
For ultimate surface restoration, use DRI WASH ‘n GUARD® OxyGone™ on the surface of the vehicle, and follow with DRI WASH ‘n GUARD® ULTRA-ION™ Waterless Carwash™ and Protective Glaze.
Caution: Prevent product from freezing. DO NOT MIX THIS PRODUCT WITH ANY OTHER CHEMICAL OR WATER. First Aid Treatment: If swallowed, call physician or poison control centre immediately.
